







North NAVIGATOR PROControl System
product code: 85001.240021
Features
- Front-line auto-unwind
- 20% lighter and 20% stronger
- Safest single-action reload QR
- New highest quality SK99 Dyneema Pro Lines
- Max-traction comfort grip
- Modular Toolless InterLoop system
- Universally compatible with any kite*
- Medium 45-50cm or Large 50-55cm
- Smoother trimming action
- Super wear-resistant
- Nautical colour coding
- 10cm of adjustment for line shrinkage
- Eliminates accidental release
- Reduces accidental unhooking
- Always rinse in fresh water
- ISO-21853 Certified
Control Bar, Quick Release with Security Finger, 12+10m Pro Lines (Ø1.55mm Front Lines, Ø1.33mm Rear Lines), Pro Freeride Loop, Standard Leash (Pro)
Bar Size | Kite Size |
---|---|
45-50cm | <11m |
50-55cm | >8m |
45-50cm | 50-55cm |
---|---|
<11m | >8m |
Auto-unwind
Smooth and reliable front-line auto-untwist20% lighter and 20% stronger
making it easier for you to focus on your ridingSafest single-action reload QR
instead of physically unwinding your lines.New highest quality Dyneema Pro Lines
Overmoulded one piece bar with internal truss structure.Unrivalled comfort
Helps eliminate your chance of accidental release and accidental unhooking.and traction
StrongModular Toolless InterLoop system
ultra-low stretch and high-load industry-leading quality Dyneema SK99 lines.Universally compatible with any kite*
Especially noticeable when your bar is wet – in both hot and cold conditions.Two adjustable bar lengths +/- 5cm
The Navigator Pro has a Modular Interchangeable Harness Loop system. There are three new Pro loops: Freeride (as supplied with the Control System)
Smoother trimming action
Freestyle (for use with the freestyle leash ring)
Super wear-resistant
and our Surf Slider.
Nautical colour coding
The Navigator Control System features a Low-V split
10cm of adjustment for line shrinkage
which is compatible with most other kites. If your kite has a High-V setup
Eliminates accidental release
we recommend using the North High-V Split Kit accessory with the Navigator / Navigator Pro to adapt your front lines.
Reduces accidental unhooking
The Nav Pro comes in two bar sizes – M (45-50cm) and L (50-55cm) – adjustable under the bar ends with retractable line winders.Always rinse in fresh water
We’ve created a new lightweight over-moulded trim handle with a wear-resistant Dyneema trim line and injection-aluminium cleat with a hard anodized coating to ensure a smoother trimming action.Auto-unwind
The new high-quality ceramic bearing inside the QR handle is engineered to ensure a frictionless rotation.
The super hard ceramic surface reduces wear
20% lighter and 20% stronger
is corrosion-resistant and performs in all temperatures.
For the smoothest sheeting and most reliable form of auto-unwind
Safest single-action reload QR
you'll see your Depower Main Line and Landing Line run inside individual tubes made from the highest-quality
New highest quality Dyneema Pro Lines
durable
Unrivalled comfort
wear-resistant TPU
and traction
stacked front to back for comfortable
Modular Toolless InterLoop system
one-handed flying.
It’s important to note that with an auto-unwinding bar
Universally compatible with any kite*
once your kite's up
Two adjustable bar lengths +/- 5cm
you can’t untwist your lines manually. Run out your front lines every time
Smoother trimming action
and ensure the red power ball (landing line) is always on the kite’s left (when you’re upwind of your kite).
Super wear-resistant
You want a spinning bar to be as lightweight as possible – to reduce the inertia required to spin. The challenge is making it both lighter and stronger. To achieve this
Nautical colour coding
we’ve engineered a new over-moulded single-piece bar and centrepiece.
The all-new Nav Pro has an internal truss structure
10cm of adjustment for line shrinkage
super stiff under load while reducing any need for excess material.
The over-moulded stainless steel bar centrepiece with titanium PVD coating is smooth
Eliminates accidental release
strong and wear-resistant
Reduces accidental unhooking
with a generous internal geometry for uninhibited bar travel and reliable auto-unwind. The grip goes all the way up to the centrepiece for comfortable one-handed flying in even the most extreme weather.
Always rinse in fresh water
The new extra secure single-action reload Quick Release has a stiffer security finger attached to QR instead of loop for reduced risk of accidental unhooking. The smaller




20% Lighter. 20% Stronger
Our minimalist design is optimised for weight savings. The over-moulded one piece bar features a lightweight internal truss structure, and smooth, strong, wear-resistant stainless steel centrepiece with titanium PVD-coating.

Universally compatible
Use your Navigator Pro with any kite. The Navigator Pro Control System features a Low-V split, which is compatible with most other kites. If your kite has a High-V setup, we recommend using the North High-V Split Kit accessory to adapt your front lines.
WHAT RIDERS SAY

No longer needing to navigate the centre line twist gives me one less component to worry about, particularly in nuking wind. And the grip is a lifesaver - particularly when you are hanging on at the end of a gnarly session. I’ve been waiting for this.
BIG AIR PRO
Jett Bradshaw
No longer needing to navigate the centre line twist gives me one less component to worry about, particularly in nuking wind. And the grip is a lifesaver - particularly when you are hanging on at the end of a gnarly session. I’ve been waiting for this.

Behind the Design with Hugh Pinfold
We’ve poured more than 25 years of research, three years of development, and hundreds upon hundreds of hours of on-water testing into this system, redesigning and improving 70% of the 130 parts that go into it.
TOOLLESS INTERLOOPS

